|
|
|
|
SW-90B ~ SW-350B > > > |
|
| SW-B Plastic Injection Molding Machine Series | |
 FEATURES | - Choices of clamping force from 90 tons to 350 tons.
- Advanced microprocessor control provides powerful function and is easy to operate.
- Multi-stage injection speed and pressure control system assures that is suitable for molding.
- Five-point double toggle system assures the motion fast and smooth.
- Using proportional flow control system.
- High-speed power clamping mold circuit reduces the cycle time and saves power.
- Mold clamping stroke is controlled by precision linear transducers .
- Using the low pressure mold clamping to protect molds.
- 100 sets of molding data is stored.
- Using microprocessor control system, and LCD monitor is being with backlight.
| | Finished Products | | | SPECIFICATION |
MODELS | UNIT | SW-90B | SW-120B | SW-150B | SW-200B | SW-250B | SW-300B | SW-350B | Injection Unit | Screw diameter | mm | 28 | 32 | 36 | 32 | 36 | 40 | 36 | 40 | 45 | 40 | 45 | 50 | 45 | 50 | 55 | 50 | 55 | 60 | 55 | 60 | 65 | Injection pressure | kg/cm2 | 2500 | 1910 | 1510 | 2330 | 1840 | 1490 | 2310 | 1875 | 1480 | 2325 | 1835 | 1490 | 2320 | 1880 | 1555 | 2315 | 1910 | 1610 | 2220 | 1865 | 1590 | Theoretical shot volume | cm3 | 111 | 145 | 183 | 160 | 203 | 250 | 234 | 289 | 366 | 314 | 397 | 491 | 429 | 530 | 640 | 589 | 712 | 848 | 760 | 904 | 1060 | Shot weight (ps) | grams | 99 | 129 | 163 | 144 | 180 | 224 | 209 | 258 | 327 | 280 | 354 | 438 | 383 | 473 | 572 | 526 | 635 | 757 | 678 | 807 | 947 | Injection rate | cm3/sec | 52 | 69 | 81 | 73 | 92 | 114 | 93 | 115 | 146 | 116 | 147 | 181 | 143 | 176 | 213 | 168 | 203 | 242 | 217 | 258 | 303 | Plasticizing capacity (ps) | kg/hr | 30 | 34 | 40 | 38 | 46 | 52 | 51 | 59 | 67 | 64 | 71 | 82 | 78 | 90 | 101 | 95 | 110 | 128 | 120 | 138 | 153 | | Screw Speed | rpm | 0-400 | 0-400 | 0-260 | 0-220 | 0-200 | 0-160 | 0-160 | Clamping Unit | Clamping force | ton | 90 | 120 | 150 | 200 | 250 | 300 | 350 | Mould opening stroke | mm | 330 | 380 | 430 | 480 | 525 | 570 | 620 | Space between tie bars | mm | 360x360 | 395x395 | 425x425 | 470x470 | 515x515 | 555x555 | 620x620 | Platen dimensions
H x V | mm | 540x540 | 595x595 | 660x660 | 720x720 | 790x790 | 850x850 | 930x930 | Mould height
min.-max. | mm | 130-400 | 140-440 | 150-500 | 160-540 | 180-580 | 200-610 | 220-670 | Ejector Stroke | mm | 100 | 100 | 140 | 140 | 170 | 170 | 190 | Ejector Force
( tons) | ton | 4.3 | 4.3 | 5.3 | 5.3 | 6.1 | 6.1 | 7 | Other | Pump driving motor | HP/kw | 15/11.2 | 20/15 | 25/18.6 | 30/22.3 | 40/30 | 50/37.2 | 50/37.2 | Heating capacity | kw | 4.6 | 6.1 | 7.9 | 11.5 | 13.7 | 17.4 | 19.8 | Thermo controller | set | (0-399) ~ 3 | (0-399) ~ 4 | (0-399) ~ 4 | (0-399) ~ 4 | (0-399) ~ 5 | (0-399) ~ 5 | (0-399) ~ 5 | Oil Tank Capacity | U.S. gal | 50 | 65 | 80 | 100 | 120 | 150 | 170 | Machine dimensions
(L x W x H) | m | 4.3x1.25x1.6 | 4.8x1.3x1.65 | 5.2x1.35x1.7 | 5.6x1.4x1.75 | 6.0x1.5x1.8 | 6.5x1.6x1.9 | 7.0x1.7x2.0 | Machine weight | tons | 3560 | 4450 | 5500 | 7200 | 8800 | 10600 | 12400 |
 Suitable electricity: AC 220V.60Hz * Specifications subject to change without notice. |
|
|
|
|
|
|
