|
|
|
|
SW-90BB ~ SW-350BB > > > |
|
SW-BB Bakelite Injection Molding Machine Series
 FEATURES |
- Choices of clamping force from 90 tons to 350 tons.
- Using the low pressure mold clamping to protect molds.
- High-speed power clamping mold circuit reduces the cycle time and saves power.
- The bakelite board and the steel board.
- The barrel heating system features a combination of oil, electric and water heater.
- Using microprocessor control system, and LCD monitor is being with backlight.
- 100 sets of molding data is stored.
- P.I.D temperature control system.
|
|
- At the front of barrel is controlled by a temperature controller to ensure the optimum range of temperature, and it upgrades qualities of products.
|
|
- Outstanding temperature retaining performance is achieved through electric heating, water cooling and oil temperature retaining.
|
|
- The steel plate combined with the heat-insulated plate to provide heat insulation and to prevent heat generation.
|
| Finished Products |
|
| SPECIFICATION |
MODELS |
UNIT |
SW-90BB |
SW-120BB |
SW-150BB |
SW-200BB |
SW-250BB |
SW-300BB |
SW-350BB |
INJECTION SYSTEM |
INJECTION DIAMETER |
mm |
32 |
36 |
36 |
40 |
40 |
45 |
45 |
50 |
50 |
55 |
55 |
60 |
60 |
65 |
INJECTION CAPACITY |
cm3 |
145 |
183 |
203 |
251 |
289 |
366 |
397 |
491 |
530 |
641 |
712 |
848 |
904 |
1061 |
SHOT SIZE (PS) |
g |
175 |
221 |
246 |
303 |
349 |
441 |
480 |
592 |
640 |
774 |
860 |
1023 |
1092 |
1281 |
oz |
6.2 |
7.8 |
8.7 |
10.7 |
12.3 |
15.5 |
16.9 |
20.8 |
22.5 |
27.3 |
30.3 |
36 |
38.5 |
45.1 |
INJECTION PRESSURE |
kg/cm2 |
1914 |
1512 |
1842 |
1492 |
1877 |
1483 |
1839 |
1490 |
1882 |
1555 |
1916 |
1610 |
1867 |
1591 |
INJECTION RATE |
cm3/sec |
69 |
81.7 |
92.3 |
114.1 |
115.6 |
146.4 |
147 |
181.9 |
176.7 |
213.7 |
203.4 |
242.3 |
258.3 |
303.1 |
INJECTION STROKE |
mm |
180 |
200 |
230 |
250 |
270 |
300 |
320 |
INJECTION SPEED |
mm/sec |
85.7 |
90.9 |
92 |
92.6 |
90 |
85.7 |
91.4 |
SCREW SPEED |
rpm |
0~400 |
0~400 |
0~260 |
0~220 |
0~200 |
0~160 |
0~160 |
CLAMPING SYSTEM |
CLAMPING FORCE |
ton |
90 |
120 |
150 |
200 |
250 |
300 |
350 |
CLAMPING STROKE(MAX) |
mm |
300 |
350 |
400 |
450 |
480 |
520 |
560 |
SPACE BETWEEN TIE BARS(HxV) |
mm |
360x360 |
400x400 |
430x430 |
480x480 |
520x520 |
570x570 |
620x620 |
MOLD THICKNESS (MIN-MAX) |
mm |
100~400 |
120~450 |
120~500 |
150~550 |
150~600 |
200~650 |
200~700 |
EJECTOR FORCE |
ton |
4.3 |
4.3 |
5.3 |
5.3 |
6.1 |
6.1 |
7 |
EJECTOR STROKE |
mm |
100 |
100 |
140 |
140 |
170 |
170 |
190 |
OTHER |
DRIVE MOTOR |
HP(kw) |
10(7.5) |
15(11.2) |
20(15) |
25(18.6) |
30(22.3) |
40(30) |
40(30) |
OIL TANK CAPACITY |
U.S.gal |
50 |
65 |
80 |
100 |
120 |
150 |
170 |
MACHINE DIMENSION (LXWXH) |
m |
4.3X1.25X1.6 |
4.8X1.3X1.65 |
5.2X1.35X1.7 |
5.6X1.4X1.75 |
6X1.5X1.8 |
6.5X1.6X1.9 |
7X1.7X2 |
NET WEIGHT |
ton |
3.6 |
4.6 |
5.8 |
7.5 |
9 |
11 |
13 |
 Specifications subject to change without notice. |
|
|
|
|
|
