HOME > Custom Injection Molding Machine > SW-AT Plastic Injection Molding Machine > SW-95~SW-260

SW-AT Plastic Injection Molding Machine Series

* FEATURES
  • Choices of clamping force from 50 tons to 1000 tons.
  • Multi-stage injection speed and pressure control system assures that is suitable for molding.
  • The hydraulic circuit, the electronic circuit safety device and the adjacent free safety bar provide a maximum protection for operators.
  • High-speed power clamping mold circuit reduces the cycle time and saves power.
  • Mold clamping stroke is controlled by precision linear transducers.
  • Using the low pressure mold clamping to protect molds.
  • 100 sets of molding data is stored.
  • Using microprocessor control system, and LCD monitor is with backlight.
  • P.I.D temperature control system.






  • Using microprocessor control system, and LCD monitor being with backlight.
  • The data is stored for five years and do not disappear through power failure.
  • Auto-check diagnosis of troubles and information.


* Finished Products

* SPECIFICATION

MODELS

UNIT

SW-95

SW-120

SW-150

SW-180

SW-220

SW-260

Injection Unit

Screw diameter

mm

32

36

40

36

40

45

40

45

50

45

50

55

50

55

60

55

60

65

Injection pressure

kg/cm2

2035

1815

1629

1949

1795

1595

1889

1645

1446

1712

1578

1460

1705

1524

2036

2036

1711

1458

Theoretical shot volume

cm3

144

184

226

203

252

317

288

365

451

381

471

569

529

642

763

712

848

996

Shot weight (ps)

grams

123

158

194

174

216

272

248

313

387

328

403

490

455

550

656

610

726

853

oz

4.3

5.5

6.8

6.1

7.6

9.5

8.7

11.0

13.6

11.5

14.2

17.2

16.3

19.4

23.1

21.5

25.6

30.0

Injection rate

cm3/sec

65.3

73.3

81.3

86.6

96.2

105.7

112.7

120.0

147.0

157.8

171.3

185.5

159.0

178.6

190.9

166.2

197.7

232.1

Plasticizing capacity (PS)

kg/hr

50

55

60

55

60

70

70

75

80

90

100

110

110

120

130

125

135

145

Clamping Unit

Clamping force

tons

90

120

150

180

220

260

Mould opening storke

mm

300

350

400

400

430

445

Space between tie bars

mm

360x260

400x300

433x343

460x380

505x400

535x415

Mould height min.-max.

mm

100~400

100~480

120~520

150~580

150~620

150~670

Ejector stroke

mm

95

110

110

120

120

140

Others

Pumping driving motor

HP/kw

10

15

20

25

25

30

Heating capacity

kw

4.6

6.1

7.9

1.55

13.7

17.4

Thermo controller

set

( 0~399) x3

(0~399) x4

(0~399) x4

(0~399) x4

(0~399) x4

(0~399) x5

Machine dimensions LxWxH

m

4.3x0.94x1.4

4.85x1.0x1.46

5.2x1.07x1.55

5.6x1.1x1.6

6.0x1.18x1.65

6.4x1.22x1.7

Machine weight

tons

3.6

4.6

5.8

7.8

9

11

Specifications subject to change without notice.